Coaching

Meet Efficiency and Public Announcement of DQs

DQ sign

Over the years, we’ve seen a lot of ‘innovations’ meant to speed up swim meets. I’ll mention a few of them before getting to the latest: public announcements of DQs.

3-False-Start Rule

For those old enough, you may remember back when swimming had a 3-false-start rule. And in championship meets, it was rare to have a sprint race start without a false start.  Can you imagine in today’s ultra-crowded meets what would happen if that rule was still in effect? Sessions could run 6-8 hours!

Multiple Heats in the Water

Another efficiency that has become very popular is multiple heats in the water at the same time. Specifically, the double-ended LC meet, with one heat starting from the other end when the previous heat is on their last length. This generally works very well, cutting up to 30 seconds off the time required for each heat. And it also provides the potential for moments of intense excitement. Every once in a while, the officials (who have clearly never done a 200 fly or 200 breast) start the trailing heat too soon.  The combination of a tiring lead swimmer and a fresh trailing swimmer can bring the whole building to their feet. It’s an unwritten rule among swimmers that if you have a chance to catch that swimmer, you throw race strategy out the window and start SPRINTING!

Of course, this raises all kinds of problems if that catch actually happens. Interference between them becomes unavoidable, but I rarely hear of either swimmer being DQ’d. The most interesting catch I’ve seen was a 200 fly, where the trailing swimmer went UNDER the lead swimmer, and still had enough room to surface, turn, and then go back under the swimmer again. Clearly it should have been a DQ, but nothing was called.

Two-to-a-Lane

This is a variation of multiple heats in the water, but the differences here involve massive savings of time, and very real chances of injury. I once had a swimmer experience an eye injury, thankfully temporary, when the other swimmer didn’t stay on her half of the lane and they collided. I understand the time savings is significant, but this real risk of injury should take precedence.

I recently asked a Level 5 official about validity of times for two-to-a-lane swimming. I was told 1) those times cannot count for records of any kind, and 2) those time can count for qualifying times for bigger meets. Which raises a huge issue of willing or unwilling collaboration. Although the two heats don’t start together, it is quite possible for one swimmer to draft off the other, as long as both stay on their sides of the lane.

Over-the-Top

Swimming has gradually reduced the amount of time between heats. It used to start with waiting until everyone finished, and then everyone got out of the pool before the next heat got on the blocks. The big innovation here was leaving the swimmers in the water until the next heat started, and then getting out. This ‘Over-the-Top’ starting system used to be fairly relaxed, but over time I’ve heard the goal time for ‘last touch to start’ dropping from each over 15 seconds, down to as little as 7 seconds. I have no problem with this as it has virtually no impact on the swimmers.

However, the rushed inter-heat timing mentality was created, and this has definitely caused problems. Expecially for backstroke races. Because the previous backstroke heat needs to exit the water first, officials can get pretty cranky when it doesn’t happen quickly. It’s not uncommon for officials to start urging/yelling at swimmers to get out right away. For young ones or paraswimmers, this sometimes just doesn’t happen quickly enough for the officials. I’ve seen an official blowing a whistle at a paraswimmer with CP for not getting out of the pool quickly enough.

It really left me wondering as to whether some officials have forgotten why we have swim meets.

 

And now we get to ….

Public Announcement of DQs

You may have already figured this out, but I hate this new innovation. Instead of getting a DQ report delivered to the coach, a generic DQ announcement is made over the PA system. Generally the announcements are something like, “DQ in Event 73, Heat 6, Lane 3. Turn infraction”. Which is not overly informative. And that only what you’d hear if the PA announcement on a pool deck with 700+ swimmers and a double-ended meet was clear. And it’s never clear.

As a result, we virtually never know about DQs until we check online, or check official posted results. And if you’re busy, you may not find out until the end of the session. Even if you do hear the announcement, then you’ve got to find the official responsible for explaining the DQs and then get hold of the DQ slip. If you have a lot of kids at the meet, it probably means you just missed some races.

The reality is that you almost never question a DQ, and often never even find out exactly what caused the DQ. I believe this is intended, as it results in less work required by officials, and fewer disputed DQs.

 

Summary

I completely understand the need in swimmer-dense areas for more efficient swim meets. And innovations such as 1-False Start, Double-Ended meets and Over-the-Top are truly efficient and generally don’t negatively impact on the meet experience.

However, Two-to-a-Lane is downright dangerous, and potentially exploitable. It only continues because of the significant time savings, and the additional money the host team can make on more distance entries.

PA of DQs also has to go. It’s strictly a time saving measure for officials, and negative impacts on the coach’s ability to help swimmer learn from DQs.

2 thoughts on “Meet Efficiency and Public Announcement of DQs

  1. In my region of the UK the officials welcome the coach checking with the referee over the reason for a DQ. We’re all there for the swimmers and the coach and swimmer need to know so they can train not to repeat the infraction. Disputing a DQ is never productive.
    My preference is for the DQ not to be announced as such an announcement can be a public embarrassment to the swimmer, but you do then need to be able to check on the results sheets. If your AOE operator is quite skilled, they can put a ‘d’ in the results on the scoreboard (though I don’t know the detail of how). This works on both Ares and Colorado systems.
    I’ve never come across multiple heats, nor two to a lane and wouldn’t be entirely happy with either. Fully agree with your views on these. Meet organisers need to be a little more strict in limiting entry numbers to prevent this from ever being considered as necessary. We normally allow 30s between heats and 40s for backstroke. I have heard that the Australians can run meets with over the top Bk starts, with the finished swimmer waiting at around the 5m mark.

    1. Steve, thanks for the information. Sounds like you live in a sane environment for swimming. In built-up areas it’s really hard to find that level of nurturing. Last year in the Toronto area, we had a meet with over 1000 swimmers in one of the sessions. There were so many swimmers that they divided warmups into three 25 minute sessions based on team. With that many swims in a session, everything is rush, rush, rush, and the focus really isn’t on the swimmer.

      As for the Australians and over-the-top backstroke, that’s one giant step too far for me. Crazy.

      Take care, and enjoy where you are!

I love comments, especially when they disagree with my view.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s